Welding Positioner
A excellent built unit featuring a digital programmable controller that will handle the rotational angle, the dwell time and repeat. Will need to weld 45 rotational degrees? No challenge, just key it in and push down on the foot control. Whilst you are welding the controller measures out the 45 degree rotation and stops. You have a consistent weld with no the will need to move your torch all around the occupation. The same applies if you want to weld around the perimeter of a circular object. The controller supports angles from one particular degree up to thousands of degrees (multiple revolutions). Dwell time allows the mandatory rest period in between operations so you could rotate for example 30 degrees and then stope for 20 seconds ahead of repeating.
The rotator is capable of supporting 50 kilograms while in the horizontal position or 25 kilos whilst vertical. There are quite a few adjustments readily available to lock the table into an inclined position amongst horizontal and vertical. Earthing of your workpiece is achieved by way of the Dinse 35-70 socket on the rear, a plug is supplied with the unit to enable easy connection to your current welder.
Speed is adjustable via the front mounted potentiometer which supplies a pulse width modulated signal to the substantial torque motor / gearbox combo. Rotational path is set by way of a toggle switch and triggering of the rotating mode can be attained with the provided foot management or the front panel mounted push button switch.
Tuesday 20 March 2012
Monday 19 March 2012
Tig Welder Performance
With this kind of weld, the arc is positioned amongst the filler metal electrode and the work piece. Shielding is presented by outwardly provided gas or fuel mixtures. A TIG weld or Tungsten Inert Fuel, on the other hand, functions by joining metals through the approach of heating with tungsten electrodes that do not become element of the finished weld. The procedure utilizes argon or other inert gasoline mixtures as shielding and filler metals are rarely used.
Some of the fundamental variations amongst the two types of welds are that MIG welding is more rapidly than making use of TIG welding, as using TIG welding needs more skill that MIG welding. A sound wire is utilized in the MIG Flux Cored Arc Welding-Fuel Shield (FCAW-G) while TIG uses a flux cored electrode.
Yet another clear difference is that TIG employs Tungsten to carry the arc, and a consumer of a TIG welder needs to have enough encounter in the craft of welding. A MIG weld consumer, meanwhile, can carry on functioning in spite of staying a novice welder.
Overall, whilst each MIG and TIG are gas shielded arc welding processes, the main distinction lies in the way the filler metal is additional to create the weld. With the TIG approach, the arc is developed between a tungsten electrode mounted in a hand-held torch and the function piece to be welded. The welder initiates the arc by means of a switch. The filler metal, in the kind of a hand held rod, is then additional to the weld puddle by the welder as the torch is manipulated along the joint which is to be welded. The MIG method uses a filler metal which is the electrode and the arc is developed when the filler metal comes into make contact with with the operate surface.
Gasoline tungsten arc welding (GTAW), also identified as tungsten inert gasoline (TIG) welding, is an arc welding procedure that utilizes a non consumable tungsten electrode to develop the weld. Gasoline tungsten arc welding is most commonly employed to weld thin sections of stainless steel and light metals such as aluminum, magnesium, and copper alloys amongst other metal properties except for lead and zinc. The process grants the operator better control more than the weld than competing methods this kind of as shielded metal arc welding and gasoline metal arc welding, permitting for stronger, increased good quality welds.
The electric arc was discovered and created by Humphry Davy in 1800. C.L Coffin also had the thought of welding an inert gasoline atmosphere in 1890, but even in the early 1900, welding non-ferrous materials like aluminum and magnesium remained difficult. To remedy the difficulty, bottled inert gasses were used in the starting of 1930. The electrical arc procedure was perfected in 1941, and became known as heliarc or tungsten inert gasoline welding due to the fact it utilized a tungsten electrode and helium as a shielding gasoline. In 1953, a new method based mostly on GTAW was produced, referred to as plasma arc welding. It affords increased control and improves weld top quality by making use of a nozzle to concentrate the electrical arc, but is largely restricted to automated methods, whereas GTAW remains mostly a manual, hand-held technique.
Advantages:
one- Concentrated Arc
two- No Slag
3- No Sparks & No Spatter
four- Tiny To No Smoke Or Fumes
five- Welds More Metals And Metal Alloys Than Any Other Approach
six- Excellent For Welding Thin Supplies
Some of the fundamental variations amongst the two types of welds are that MIG welding is more rapidly than making use of TIG welding, as using TIG welding needs more skill that MIG welding. A sound wire is utilized in the MIG Flux Cored Arc Welding-Fuel Shield (FCAW-G) while TIG uses a flux cored electrode.
Yet another clear difference is that TIG employs Tungsten to carry the arc, and a consumer of a TIG welder needs to have enough encounter in the craft of welding. A MIG weld consumer, meanwhile, can carry on functioning in spite of staying a novice welder.
Overall, whilst each MIG and TIG are gas shielded arc welding processes, the main distinction lies in the way the filler metal is additional to create the weld. With the TIG approach, the arc is developed between a tungsten electrode mounted in a hand-held torch and the function piece to be welded. The welder initiates the arc by means of a switch. The filler metal, in the kind of a hand held rod, is then additional to the weld puddle by the welder as the torch is manipulated along the joint which is to be welded. The MIG method uses a filler metal which is the electrode and the arc is developed when the filler metal comes into make contact with with the operate surface.
Gasoline tungsten arc welding (GTAW), also identified as tungsten inert gasoline (TIG) welding, is an arc welding procedure that utilizes a non consumable tungsten electrode to develop the weld. Gasoline tungsten arc welding is most commonly employed to weld thin sections of stainless steel and light metals such as aluminum, magnesium, and copper alloys amongst other metal properties except for lead and zinc. The process grants the operator better control more than the weld than competing methods this kind of as shielded metal arc welding and gasoline metal arc welding, permitting for stronger, increased good quality welds.
The electric arc was discovered and created by Humphry Davy in 1800. C.L Coffin also had the thought of welding an inert gasoline atmosphere in 1890, but even in the early 1900, welding non-ferrous materials like aluminum and magnesium remained difficult. To remedy the difficulty, bottled inert gasses were used in the starting of 1930. The electrical arc procedure was perfected in 1941, and became known as heliarc or tungsten inert gasoline welding due to the fact it utilized a tungsten electrode and helium as a shielding gasoline. In 1953, a new method based mostly on GTAW was produced, referred to as plasma arc welding. It affords increased control and improves weld top quality by making use of a nozzle to concentrate the electrical arc, but is largely restricted to automated methods, whereas GTAW remains mostly a manual, hand-held technique.
Advantages:
one- Concentrated Arc
two- No Slag
3- No Sparks & No Spatter
four- Tiny To No Smoke Or Fumes
five- Welds More Metals And Metal Alloys Than Any Other Approach
six- Excellent For Welding Thin Supplies
Subscribe to:
Posts (Atom)