Welding rotator and welderpositioner tig welding rotator mig welders positioner

Welding Positioner

A excellent built unit featuring a digital programmable controller that will handle the rotational angle, the dwell time and repeat. Will need to weld 45 rotational degrees? No challenge, just key it in and push down on the foot control. Whilst you are welding the controller measures out the 45 degree rotation and stops. You have a consistent weld with no the will need to move your torch all around the occupation. The same applies if you want to weld around the perimeter of a circular object. The controller supports angles from one particular degree up to thousands of degrees (multiple revolutions). Dwell time allows the mandatory rest period in between operations so you could rotate for example 30 degrees and then stope for 20 seconds ahead of repeating.
The rotator is capable of supporting 50 kilograms while in the horizontal position or 25 kilos whilst vertical. There are quite a few adjustments readily available to lock the table into an inclined position amongst horizontal and vertical. Earthing of your workpiece is achieved by way of the Dinse 35-70 socket on the rear, a plug is supplied with the unit to enable easy connection to your current welder.
Speed is adjustable via the front mounted potentiometer which supplies a pulse width modulated signal to the substantial torque motor / gearbox combo. Rotational path is set by way of a toggle switch and triggering of the rotating mode can be attained with the provided foot management or the front panel mounted push button switch.